Push Buttons

In order to operate all motoscopes a non locking switch (push button) is absolutely necessery. A push button 'mini' comes with the motoscope mini and the motoscope light. Such a push button is not part of the supply with the motoscope classic/Chronoclassic. Some people use their high-beam flasher switch instead of an external push button, because it's non-locking, pre-installed and easy to reach. It is very important to use definitely a non locking switch instead of a regular switch.


 

External gear shift lamp/-LED

All instruments of series motoscope light and motoscope classic/Chronoclassic have an internal electronic switch that is able to trigger an external gear shift lamp. Due to the adjustability of the triggering engine speed the function can also be used as a warning function in regard to the most permitted engine speed or, as a display for the optimal engine speed for gear shifting.

LED-Cluster
At the moment we offer a LED cluster, which is confectioned ready-to-use. The scope of delivery contains a connection cable, an protective resistor and a fastening screw. See pic. 1 and 2. on the right


 

Plug connectors

 

Plug connector set AMP-6-pin 'supersealed'
This high-quality plug connector is made of synthetic material. It is waterproof (IP67) and comply with all regulations in the field of vehicle engeneering (IEC529) and is proved for many years.
In order to connect, e.g. the motoscope light, by using a 5- or 6-pole cable, one plug connector set is needed.

Plug connector set 'compact' 6 pin
These robust plug connector is made of synthetic material and proved for many years in the field of vehicle engeneering. Due to its compact measures it is espezially suitable for motorcycles.
In order to connect the instruments with a 5- or 6-wire cable, one plug connector set is needed.

Plug connector set 'compact' 6 + 9 pin
These robust plug connector is made of synthetic material and proved for many years in the field of vehicle engeneering. Due to its compact measures it is espezially suitable for motorcycles.
In order to connect the instruments with a 5- or 6-wire cable, one plug connector set is needed.